WH-26 – Wire Diameter 0.6 to 2.6 mm, 2 Point Coiling

An 8-axis, 2-point coiling machine with a maximum wire diameter of 2.6 mm and excellent cost-effectiveness.
Equipped with an oscillating cut as a standard feature, along with a center base mechanism that eliminates the need for cut readjustment when the coil diameter is changed.
Features
Feature 1
Dedicated MNO Program for Spring Production
- Easy operations for quicker preparation.
- High resolution for controlling the latest servo motors.
- Compatible with compression spring creation programs based on line graphs.
- Allows varied control based on measurement results, such as the pitch and diameter.
- Common program for both torsion machines and coiling machines.
- Includes a motor sensor system.
- Versatile production management screen and production data collection function.
Feature 2
2-point coiling mechanism
- Enables the clockwise/counterclockwise direction to be switched simply by configuring a setting in the program.
- Heavy sliding parts do not need to be changed during replacement.
- Can produce coils with an outer diameter of up to 70 mm, increasing the range of items that your company can produce (wire guide length: 110 mm).
Feature 3
Taper synchronization constant
- Enables the taper tilt to be managed with a value from 0 to 100.
- Suitable for load adjustment in addition to shape adjustment, as fine adjustment can be performed in 100 levels.
Feature 4
2-point coiling machine with a wire diameter of 0.6 to 2.6 mm
- Enables easy setup and high-accuracy, high-speed production of springs.
- The clockwise/counterclockwise direction can be switched simply by configuring a setting in the program.
- The alignment of the cut tool and core does not require readjustment after being decided once.
- One-touch switching between oscillating cut and straight cut.
- The oscillating cut bearing (oscillation) can be freely adjusted.
- An optional slip sensor is provided for detecting slips when feeding.
- Includes our newly-developed specialist MNO program for spring production, enabling simple and precise operations.
Feature 5
Advanced cut slide function
- The alignment of the cut tool and core does not require readjustment after being decided once.
- As the cut slide and core slide are both located on the center slide, the positional relationship of the two tools does not change, meaning that readjustment is not required.
- The cutting method can be changed.
- You can easily switch between oscillating cut and straight cut.
- The oscillating cut bearing (oscillation) can be adjusted.
- Adjust the bearing using the eccentric pin on the slide.
Specifications
Capacity | Wire Dia. 0.6~2.6mm | Arbor Axis | Resolution 0.001mm |
---|---|---|---|
Outside Dia. 70mm | Solenoid valves | 4pcs(8pcs at max) | |
D/d 4 or more | Service air pressure | Max 0.5 Mpa | |
Feed Axis | Resolution 0.001mm | Power source | AC 200V, 3-Phase, 20A |
Max. Speed 102m/min | Net weight | 1,400kg | |
Cut Axis | Resolution 0.001° | Control device | Max. 9-axis to be controlled by computer
– OS Windows XP |
Wedge-Pitch Axis | Resolution 0.001mm | ||
Upper/Lower Point Axis × 2 | Resolution 0.001mm | Display | 17” TFT color LC Display |
Point Center Axis | Resolution 0.001mm | External memory | USB thumb drive |
Push-Pitch Axis | Resolution 0.001mm | Service Temp. | 0~40℃ |